Downloads

APSV06 installation guide APVS06 media seperated valve catalog

Technical Data

Function: 2-way, 2-position, normally closed, double acting air piloted.
Port sizes: 1/4″ NPT, 3/8″ NPT, 1/2″ NPT.
Orifice size/flow factor: 12.5 mm / 2.45 Cv.
Pressure range: Vacuum to 10 bar (media), 4.1–10 bar (pilot pressure).
Temperature range:
- Fluid: up to +60°C
- Environment: +10°C to +50°C
Media: All fluids and gases compatible with wetted materials.
Mounting: On pipe, 2× Ø4.32 mm blind holes for #8 screws.
Wetted materials:
- Valve body: Glass-filled nylon.
- Elastomers: FKM, NBR, EPDM (others available on request).
- Fasteners: 316 Stainless Steel (optional PEEK).
Pilot valve data:
- Function: 3-way, 2-position, direct acting, normally closed.
- Port size: 1/8″ NPT.
- Coil data:
  - Duty cycle: Continuous.
  - Encapsulation: Glass-filled nylon.
  - Insulation: Class F.
  - Power rating: 6.5 Watt (VDC), 8.5 VA (VAC).
  - Voltage: 12, 24 VDC; 120, 220, 240 VAC (50/60 Hz).
  - Voltage tolerance: ±10%.
  - Winding: Class H.
Connections:
- Spades: AMP 6.3 × 0.8 mm, width 11 mm (DIN style “A” EN175301-803).
- Flying leads: PVC, 22 AWG, multi-strand copper wire, 300V, minimum length 30 cm.
Weight: 440 grams (pilot valve adds 113 grams).

Series APVS06 2-way media separated valve

The Spartan Scientific Series APVS06 air piloted 2-way media separated valve is a single acting, normally closed diaphragm valve. It can also be a double acting diaphragm valve. It is designed to control high purity, aggressive, and corrosive liquid chemicals.

This valve has a compact design with a small footprint. It also has a low dead volume. The composite body and elastomers (FKM, NBR, EPDM) support compatibility with many media.

The 12.5 mm orifice provides a flow factor of 2.45 Cv. This is much higher than similar valves. The valve supports media pressure from vacuum to 10 bar. It requires a minimum pilot pressure of 4.1 bar.

If the pilot gas fails, the valve will fail closed. If power fails but pilot gas remains, the valve will stay open. Each valve is tested to the ANSI FCI 70-2 Class VI standard.