elektrisch pilootventiel 40A0

Downloads

40A0 water valve pilot catalog

Technical Data

  • Operator Type: Solenoid valve operator for 2-way or 3-way, 2-position, direct-acting, normally closed or normally open.
  • Orifice Sizes / Flow Factor (Cv):
    • 0.8 mm / 0.03 Cv.
    • 1.6 mm / 0.12 Cv.
    • 2.4 mm / 0.24 Cv.
    • 3.0 mm / 0.31 Cv.
    • 4.0 mm / 0.52 Cv.
    • 6.0 mm / 0.72 Cv.
  • Pressure Range: Vacuum to 83 bar (depending on orifice size and function).
  • Temperature Range:
    • Medium: Up to +90°C.
    • Ambient: +10°C to +50°C.
  • Response Time: 12 ms (full cycle).
  • Media: Air, inert gases, light oil, water (contact factory for compatibilities).
  • Protection Class: IP65 (IEC 144), NEMA 4 (dust-tight and water-resistant with electrical connector).
  • Materials:
    • Elastomers: EPDM, FKM, NBR.
    • Operator Parts: 300 and 400 Series Stainless Steel.
    • Orifice Insert: 300 Series Stainless Steel.
    • Shading Ring: Copper (AC only).
    • Springs: 300 Series Stainless Steel.
  • Coil Specifications:
    • Duty Cycle: Continuous (within specifications).
    • Encapsulation: Glass-Filled Nylon.
    • Insulation: Class F.
    • Power: 10 Watts (DC), 11 VA (AC).
    • Voltage: 6, 12, 24 VDC; 24, 120, 220, 240 VAC 50/60 Hz.
    • Voltage Tolerance: ±10% Nominal.
    • Winding: Class H.
  • Connections: DIN 43650 Form “A” / ISO 4400, EN175301-803:2006, flying leads (PVC, 22 AWG, multi-strand copper wire, 300V, 12″ minimum length).

Series 40A0 Electric Pilot Valve DIN 43650

The Spartan Scientific Series 40A0 solenoid valve operators are used as 2-Way & 3-Way, 2-Position Normally Closed or Normally Open, functions for the control of air, light oil, water and inert gases. The robust design incorporates all stainless steel stop, plunger and tube assembly as well as spring compensated top seat. Available in 0.8mm (0.03 Cv) to 6.0mm (0.72 Cv) orifice sizes, the 40A0 can control a broad range of flow and pressure ratings. Standard elastomers are FKM, NBR and EPDM. The class F coils are all nylon encapsulated, 100% duty, all standard voltage and are available in DIN 43650 Form “A”, flying lead, DIN form A connector, 1/2” conduit. Available in UL recognized and CSA approved as well as other institutional approvals and oxygen cleaned upon request.

Advantages

  • Robust design for reliable performance.
  • Wide range of orifice sizes for diverse applications.
  • Suitable for air, inert gases, light oil, and water.
  • Fast response time.
  • Dust-tight and water-resistant (IP65/NEMA 4).
  • Continuous duty cycle possible.
  • UL recognized and CSA approved (upon request).
Ask a question about this product

Related products